XLPE Foam Insulation

• Application
• Thermal and Acoustic Insulation for HVAC, Refrigeration, Ducting, Wall, and Roof Insulation

• Breakdown Voltage
• Greater than 40 kV/mm Volt (V)

• Coating Type
• Single Aluminum Foil Side

• Color
• Silver (Foil Side)

• Density
• 40 Gram per cubic centimeter(g/cm3)

• Feature
• Moisture Resistant, Lightweight, Chemical Resistant, Closed Cell Structure

• Heat Conductivity
• 0.034 W/mK Watt/Meter/K (w/(m.k)

• Installation Guideline
• Can be cut to size and installed with adhesives, tapes, or mechanical fasteners on clean, dry surfaces

• Layer
• Single Layer

• Material
• XLPE (Cross-linked Polyethylene) Foam with Aluminum Foil Lamination

• Max Withstanding Temperature
• -40C to +80C

• Product Type
• Insulation Sheet Foil

• Rated Voltage
• Up to 1 kV Volt (V)

• Size
• 6 mm thickness x 1.2 m width x custom length

• Surface Treatment
• Aluminum Foil Laminated

• Tensile Strength
• >0.20 MPa Megapascals (MPa )

• Thermal Conductivity
• 0.034 W/mK Watt/Meter/K (w/(m.k)

• Thickness
• 6 mm Meter

• Width
• 1.25 m Meter (m)

• Application
• HVAC, duct insulation, roofing, wall and floor thermal insulation, pipe insulation, cold storage

• Breakdown Voltage
• Above 30 kV/mm Volt (V)

• Coating Type
• Aluminum Foil Coated

• Color
• Silver (foil side), White/Grey (foam side)

• Density
• 33 Kilogram per cubic meter (kg/m3)

• Feature
• Lightweight, Moisture and vapor resistant, Non-corrosive, CFC and HCFC free, Closed-cell structure

• Heat Conductivity
• 0.034 - 0.038 W/mK Watt/Meter/K (w/(m.k)

• Installation Guideline
• Easy to cut and install using tapes, adhesives or mechanical fasteners

• Layer
• Single (or Multi-layer upon request)

• Material
• XLPE (Cross-Linked Polyethylene) Foam with Aluminum Foil Lamination

• Max Withstanding Temperature
• -40C to +110C

• Product Type
• Insulation Sheet Foil

• Rated Voltage
• Up to 11 kV Volt (V)

• Size
• 1.25 MTR X 16 MTR

• Surface Treatment
• Laminated with reflective aluminum foil

• Tensile Strength
• Above 150 kPa Kilopascals (KPa)

• Thermal Conductivity
• 0.034 - 0.038 W/mK Watt/Meter/K (w/(m.k)

• Thickness
• 25 mm Millimeter (mm)

• Width
• 1.25 Meter (m)

• Application
• Thermal insulation for ducts, roofing, partition, wall, HVAC, and pipe insulation

• Coating Type
• Single side reflective aluminum foil

• Color
• Silver (Foil Finish)

• Density
• 35 Kilogram per cubic meter (kg/m3)

• Feature
• Lightweight, moisture-resistant, sound absorbent, high thermal insulation, non-corrosive

• Heat Conductivity
• 0.034 W/mK Watt/Meter/K (w/(m.k)

• Installation Guideline
• Can be easily cut to size and installed using adhesive or mechanical fasteners

• Layer
• Single layer XLPE with foil

• Material
• XLPE (Cross Linked Polyethylene) Foam with Aluminum Foil Facing

• Max Withstanding Temperature
• -40C to +80C

• Product Type
• Insulation Sheet Foil

• Rated Voltage
• Not applicable (thermal insulation material) Volt (V)

• Size
• 1.25 MTR X 45MTR

• Surface Treatment
• Aluminum Foil Laminated

• Tensile Strength
• 120 to 200 kPa Kilopascals (KPa)

• Thermal Conductivity
• 0.034 W/mK Watt/Meter/K (w/(m.k)

• Thickness
• 9 mm Millimeter (mm)

• Width
• 1.25 Meter (m)

• Application
• Thermal and Acoustic Insulation in HVAC, Roofing, Ducting, Wall, Flooring

• Breakdown Voltage
• Above 40 kV/mm Volt (V)

• Coating Type
• Single Sided Aluminium Foil

• Color
• Silver / Grey

• Density
• 33 Gram per cubic centimeter(g/cm3)

• Feature
• Fire Retardant, Moisture Resistant, Lightweight, Non-corrosive

• Heat Conductivity
• 0.034 W/mK Watt/Meter/K (w/(m.k)

• Installation Guideline
• Can Be Glued or Mechanically Fastened

• Layer
• Single or Multi-layered

• Material
• XLPE (Cross Linked Polyethylene) Foam

• Max Withstanding Temperature
• -40C to 110C

• Product Type
• Insulation Sheet Foil

• Rated Voltage
• 230 V Volt (V)

• Surface Treatment
• Aluminium Foil Finish

• Tensile Strength
• > 0.18 MPa Megapascals (MPa )

• Thermal Conductivity
• Low Watt/Meter/K (w/(m.k)

• Thickness
• 13 mm Millimeter (mm)

• Width
• 1.25 Meter (m)

• Application
• HVAC, Cold Storage, Duct Insulation, Pipe Insulation

• Breakdown Voltage
• Greater than 32 kV/mm Volt (V)

• Coating Type
• Reinforced Aluminum Foil Coating

• Color
• Silver (Foil Side), Grey (Foam Side)

• Density
• 33 Gram per cubic centimeter(g/cm3)

• Feature
• Moisture Resistant, Soundproof, Anti-Corrosive, Lightweight

• Heat Conductivity
• 0.034 W/mK at 0C Watt/Meter/K (w/(m.k)

• Installation Guideline
• Cut to fit, glue or tape on clean, dry surface

• Layer
• Single layer with ONE side foil

• Material
• Cross Linked Polyethylene (XLPE) Foam with Aluminum Foil

• Max Withstanding Temperature
• -40C to +110C

• Product Type
• Thermal Insulation Sheet

• Rated Voltage
• 1100 V Volt (V)

• Surface Treatment
• ONE Side Aluminium Foil Laminated

• Tensile Strength
• 0.2~0.3 MPa Megapascals (MPa )

• Thermal Conductivity
• 0.034 W/mK Watt/Meter/K (w/(m.k)

• Thickness
• 19 mm Millimeter (mm)

• Width
• 1.25 Meter (m)